Metallizing Equipment, MEC Jodhpur

Cold Spray is an advanced coating and repair process that involves accelerating fine metal powders through a supersonic gas jet to bond them onto a surface at high velocity. Unlike traditional thermal spray methods, Cold Spray operates below the melting point of the materials, preserving their properties and preventing oxidation or thermal damage. It's widely used in aerospace, automotive, and defense industries for repairing components, corrosion protection, and additive manufacturing.

Model: SPRAYCOLD ^®

The MEC SRAYCOLD™(MSC-500) System is a compact and portable system equipped with built-in PLC, Touch Screen Operation, Electrical hardware, and a powder feeder. A lightweight gun with an inbuilt Heater makes manual operation easy. The PLC incorporates a P.I.D Closed loop temperature controller to maintain the gas temperature precisely and effectively. The system also features the capability to integrate with external controllers such as robots or CNC/PLC controllers.

Pressure Range: Upto 10 Bar.
Heating Range: 100-500° C
Wide Range of Spray material Spectrum
Working Gas: Air Only
Single-Phase Electrical Supply Requirement

Coating Features :

High adhesion (30-80 MPa).
High cohesion (30-80 MPa).
Homogeneity of the surface.
High electrical conductivity between the coating and the substrate.
Any coating thickness (20 microns to 10 cm).
Roughness of the surface coating is Rz = 20-40.
Processing coatings can be produced by conventional machining methods.
The coating may be applied to any metal, glass, and ceramics.

SPRAYCOLD^® System consists of the Following Components:

Control Module with inbuilt Powder Feeder, Model: MSC-500
Cold Spray Gun with inbuilt Heater, Model: MCS-23
Hoses and Cables from Control Module to Gun

Technical Specification

Maximum compressed air input pressure.	10 bar ( 150 psi)
Compressed air consumption	0.3-0.4 m /min
Compressed air purity	free of water and oil
Compressed air operating pressure (inside spraying gun MCS - 23)	Upto 8 bar (120 psi)
Compressed air operating temperature (in the input of the nozzle)	100 - 500° C
Power supply	One-phase alternate current of 50±1 Hz and 220 V ( ±10%)
Maximum power consumption	3.3 kW
Time required for reaching an operating condition	no more than 30 seconds
Powder consumption	10-60 gm/min (Compatible Powder will be supplied by MEC)
Capacity of Powder Feeder	3350 CC (3.3 Liter)
Dimensions of the equipment: - Control panel with powder feeder Total mass of the equipment	800(W)x500(L)x1600(H) 106 kg (approx.)

Meta Description

METALLIZING EQUPMENT CO.