Metallizing Equipment Co. Pvt. Ltd.
testing facilities thermal spray thermal spraying flame spray arc spray metal spray metallizing export

Testing Facilities

 

MEC R&D Laboratory is recognized by Department of Science and Industrial Research – Govt. of India (DSIR). Further, accreditation from National Accreditation Board for Testing and Calibration Laboratories (NABL) has been obtained.

Spraywatch
Spraywatch

Osier – Finland make "Spraywatch" is used for online measurement of spray particle velocity, temperature, number of particles (count or flux) and flame characteristics.


This is specially designed for continuous process monitoring. It can be easily mounted on either side of the thermal spray gun on a robotic/manipulator arm.

Thermal Image Analyzer
Thermal Image Analyzer
FLIR Systems make Thermal Image analyzer, Cameras are used for capturing and recording thermal distribution and variations in real time, allowing us to accurately measure heat patterns, dissipation, leakage, and other temperature factors in equipment, products and processes
CMM:
CMM
Carl ZeissUSA) Co-ordinate Measuring Machine is use for measuring the physical geometrical characteristics of an object. A machine which takes readings in six degrees of freedom and displays these readings in mathematical form is known asa CMM.
Scanning Electron Microscopes (SEM) :
Scanning Electron Microscopes (SEM)
MEC has acquired Scanning Electron Microscopes (SEM) which deliver high resolution surface information and superior materials contrast. SEM are widely used in electron microscopy sciences and application fields such as nanotechnology, materials analysis, semiconductor failure analysis, life sciences and quality assurance. Magnification upto 100000x provide each & every detail about smallest particle of the testing piece. We use it for checking composition of thermal spray wires & powders, coating characteristics, base material properties etc.
Micro Hardness Tester (ASTM E384):
Micro Hardness Tester (ASTM E384)
Metallurgical Microscope with Image Analyzer:
Metallurgical Microscope with Image Analyzer
Tensile Bond Strength Tester (ASTM-C633):
Tensile Bond Strength Tester (ASTM-C633)
Friction & sliding wear monitor (ASTMG95a)
Friction & sliding wear monitor (ASTMG95a)
Surface Roughness Tester (ISO-3274)
Surface Roughness Tester (ISO-3274)
Rockwell Hardness Tester (ASTM-E18)
Rockwell Hardness Tester (ASTM-E18)
Thickness gauge of various types
Thickness gauge of various types
Stereoscope
Stereoscope
Dry Abrasion Test (ASTM G-65)
Dry Abrasion Test (ASTM G-65)
Image Analyzer:
Image Analyzer
Caution :- Many people have copied our trademark, name, logo and email-id. Hence be cautious.
©2007-2015, Metallizing Equipment Co. Pvt. Ltd. All Rights Reserved.